Selective sendmail relaying based on self-signed keys

Back in the early days of the Internet, people trusted one another not to abuse email. Sure, there were accidents. A badly configured mailing list could fill up with traffic as two vacation programs talked to one another, each informing the other that his latest message would not be read until some later date, because the recipient was out of the office.

In those days, you set up your sendmail to relay messages for others. Many people had email addresses that weren’t on a full-time connection to the network, they might be on a BBS that did a nightly download of email, or down some Bitnet rabbit hole. Email was relayed from one intermediate post to another, rather than being simply sent directly from the sender to the receiver. A sendmail daemon that relayed messages for others was helpful to the community, everybody pitched in to get everyone’s email where it was ultimately intended.

Then came new developments. Canter & Siegel, the September that never ended, and the presence of people who would buy things they saw in an unsolicited email message. Spam started to appear in mailboxes. Suddenly, being a helpful person and relaying messages was no longer beneficial to the community, as commercial email senders used relays to hide the origins of their messages. People started turning off open relays on their boxes as a defensive move.

So, now you’ve got a domain set up with a sendmail daemon at home, and you’re traveling with a laptop. To make this a bit more complicated, let’s say your laptop is a work computer, and you send email from its sendmail, but with a different domain than your home computer. Everything’s working fine, until you find that the coffee shop in Beijing where you’re using your laptop has made it onto a list of spamming IP numbers. Some recipients of your messages may not receive them because their sendmail is set up to refuse messages from computers on these bad IP numbers. You know that your home computer is not on a banned IP number, so it would be nice if you could forward your laptop-generated work-related messages through your home computer. It would be even nicer if people selling generic pharmaceuticals could not do the same thing, otherwise your home computer’s IP number will very quickly find itself on one of those banned lists. So, you want to allow relaying from your laptop, but only from your laptop, and do it easily even if you move to another coffee shop.

What you want, then, is a way for your home computer to recognize your laptop, and permit only that computer to relay messages through the home sendmail. This will be done with sendmail’s TLS facility. You will create a private certificate authority, one you don’t have to pay to sign your keys. You’ll then use a signed certificate to verify the identity of the laptop. The following procedure will be performed on the home computer, only at the end of this process will the laptop be involved.

We’ll start by creating two directories on your home computer, one for the certificate authority, and the other for the signed certificates. I’ll use the directory locations that are found in the default OpenSSL configuration file, so that you don’t have to edit too many files.

mkdir /etc/mail/CA /etc/mail/certs /etc/mail/CA/demoCA /etc/mail/CA/demoCA/private

Copy the OpenSSL openssl.cnf file into /etc/mail/CA.

Next, we will create the signing certificate.

$ cd /etc/mail/CA
$ openssl req -new -x509 -keyout demoCA/private/cakey.pem -out demoCA/cacert.pem -days 1000 -config openssl.cnf

You will be prompted for several fields, such as country code, location, name. Here’s a sample dialogue:

$ openssl req -new -x509 -keyout demoCA/private/cakey.pem -out demoCA/cacert.pem -days 1000 -config openssl.cnf
Generating a 1024 bit RSA private key
.............++++++
.........++++++
writing new private key to 'demoCA/private/cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:CA
State or Province Name (full name) [Some-State]:Ontario
Locality Name (eg, city) []:Toronto
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Example
Organizational Unit Name (eg, section) []:
Common Name (eg, YOUR name) []:Bert Ificate
Email Address []:bertificate@example.com

When prompted, you will have to enter a pass phrase twice. Remember this phrase, you will need it if you ever want to sign certificates with this signing certificate.

This command creates new files: /etc/mail/CA/demoCA/cacert.pem and /etc/mail/CA/demoCA/private/cakey.pem. The file contains encoded information related to a certificate signing authority that will be valid for 1000 days.

Next, you must create the certificate that you will use to validate your laptop. You enter the commands:

$ cd /etc/mail/CA
$ openssl req -nodes -new -x509 -keyout laptopcert.pem -out laptopcert.pem -days 365 -config openssl.cnf

Again, you will have to answer some questions. Here is a sample dialogue:

$ openssl req -nodes -new -x509 -keyout laptopcert.pem -out laptopcert.pem -days 365 -config openssl.cnf
Generating a 1024 bit RSA private key
....++++++
............................................++++++
writing new private key to 'laptopcert.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:CA
State or Province Name (full name) [Some-State]:Alberta
Locality Name (eg, city) []:Calgary
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Example
Organizational Unit Name (eg, section) []:
Common Name (eg, YOUR name) []:Rhoda Warrior
Email Address []:rhoda-warrior@example.com

Now, you have a certificate for your laptop, but it hasn’t yet been signed. You use the signing certificate to vouch for the laptop certificate. First, we have to set up a bit more information for the signing process:

$ mkdir /etc/mail/CA/demoCA/newcerts
$ touch /etc/mail/CA/demoCA/index.txt
$ echo 01 > /etc/mail/CA/demoCA/serial

You’ll only have to do this the first time you set up a signing authority.

Now, we issue two commands to sign the laptop certificate:

$ openssl x509 -x509toreq -in laptopcert.pem -signkey laptopcert.pem -out tmp.pem
$ /usr/local/ssl/bin/openssl ca -config openssl.cnf -policy policy_anything -out signed-laptopcert.pem -infiles tmp.pem

Once again, there will be a brief dialogue when the second command is run, something like this:

$ openssl ca -config openssl.cnf -policy policy_anything -out signed-laptopcert.pem -infiles tmp.pem
Using configuration from openssl.cnf
Enter pass phrase for ./demoCA/private/cakey.pem:
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 1 (0x1)
Validity
Not Before: Mar 12 00:46:43 2008 GMT
Not After : Mar 12 00:46:43 2009 GMT
Subject:
countryName = CA
stateOrProvinceName = Alberta
localityName = Calgary
organizationName = Example
commonName = Rhoda Warrior
emailAddress = rhoda-warrior@example.com
X509v3 extensions:
X509v3 Basic Constraints:
CA:FALSE
Netscape Comment:
OpenSSL Generated Certificate
X509v3 Subject Key Identifier:
67:11:5A:25:6F:5C:70:36:03:14:3B:04:4A:8C:30:C9:CF:60:51:AE
X509v3 Authority Key Identifier:
keyid:F4:CE:58:BD:82:8A:E3:EC:0F:89:C6:60:E2:45:58:A4:CA:79:C8:89

Certificate is to be certified until Mar 12 00:46:43 2009 GMT (365 days)
Sign the certificate? [y/n]:y


1 out of 1 certificate requests certified, commit? [y/n]y
Write out database with 1 new entries
Data Base Updated

Now, it’s time to tell the home machine’s sendmail that it should relay messages received from this key. Add a line to the /etc/mail/access.src file that looks like this:

CertIssuer:/C=CA/ST=Ontario/L=Toronto/O=Example/CN=Bert+20Ificate/emailAd
dress=bertificate@example.com RELAY

You’ll have to make that file readable by sendmail:

makemap hash access.db < access.src

And now we have to make sure that the home machine’s sendmail knows where to find its certificates and access file. Build a new sendmail.cf using a sendmail.mc something like this:

divert(0)dnl
VERSIONID(`sendmail.mc for example.com version 01')
OSTYPE(linux)dnl
DOMAIN(example.com)dnl
FEATURE(`nouucp', `reject')
FEATURE(`virtusertable', `hash /etc/sendmail/virtusertable')dnl
FEATURE(`genericstable', `hash /etc/sendmail/genericstable')dnl
FEATURE(`local_procmail', `/usr/local/bin/procmail')
FEATURE(`access_db', `hash -T /etc/mail/access')
FEATURE(`mailertable')
MAILER(local)
MAILER(smtp)
define(`CERT_DIR', `MAIL_SETTINGS_DIR`'certs')dnl
define(`confCACERT_PATH', `CERT_DIR')dnl
define(`confCACERT', `CERT_DIR/CAcert.pem')dnl
define(`confSERVER_CERT', `CERT_DIR/MYcert.pem')dnl
define(`confSERVER_KEY', `CERT_DIR/MYkey.pem')dnl
define(`confCLIENT_CERT', `CERT_DIR/MYcert.pem')dnl
define(`confCLIENT_KEY', `CERT_DIR/MYkey.pem')dnl

Now, we move some things around a bit. We copy the signing certificate and laptop signed certificate like this:

$ cd /etc/mail/CA
$ /bin/cp signed-laptopcert.pem /etc/mail/certs
$ /bin/cp demoCA/cacert.pem /etc/mail/certs/CAcert.pem
$ cd /etc/mail/certs
$ ln -s signed-laptopcert.pem `openssl x509 -noout -hash < signed-laptopcert.pem`.0

The three files, demoCA/cacert.pem, laptopcert.pem and signed-laptopcert.pem get copied onto the laptop, in its /etc/mail/certs directory. Now, you must tell the laptop’s sendmail that these are its certificates. This is done by building (on the laptop) the sendmail.cf file from a sendmail.mc file that looks roughly like this:

divert(0)dnl
VERSIONID(`$Id: generic-linux.mc,v 8.1 1999/09/24 22:48:05 gshapiro Exp $')
OSTYPE(linux)dnl
DOMAIN(example.net)dnl
define(`confCACERT_PATH', `/etc/mail/certs/')
define(`confCACERT', `/etc/mail/certs/cacert.pem')
define(`confCLIENT_CERT', `/etc/mail/certs/laptopcert.pem')
define(`confCLIENT_KEY', `/etc/mail/certs/signed-laptopcert.pem')
define(`confSERVER_CERT', `/etc/mail/certs/laptopcert.pem')
define(`confSERVER_KEY', `/etc/mail/certs/signed-laptopcert.pem')
FEATURE(`genericstable')
FEATURE(`virtusertable')
FEATURE(`local_procmail', `/usr/local/bin/procmail')
MAILER(local)dnl
MAILER(smtp)dnl

Finally, you’ll have to decide when you want to relay through the home computer. You really have two choices. You could set it up so that all messages are always relayed through the home computer, by setting a smart relay in your sendmail.cf, or you could relay them explicitly. There are other places that identify the technique for setting up a smart relay, so I’ll just describe the second, on-demand version.

If you are trying to send email from your laptop to the user somebody@example.net, but want to relay it through your home computer at example.com, you would send the message to this email address:

somebody%example.net@example.com

And there you go, on-demand secure relaying of messages through your home computer.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*

反垃圾邮件 / Anti-spam question * Time limit is exhausted. Please reload CAPTCHA.